Black pipe couplings are forged from high-quality black carbon steel pipes sandblasted or coated to enhance corrosion resistance. Hebei Sanvo is a quality carbon steel coupling manufacturer and supplier in China and exports and customizes black steel merchant couplings and API line pipe couplings, etc. The specifications include full coupling, half coupling, extra heavy full coupling, extra heavy half coupling, etc.
This guide answers all the questions you have about black pipe couplings. If you have been looking for information about black steel merchant couplings, look no further.
You will find the most direct, yet detailed answers to basic questions, you often ask about black steel full merchant couplings and half merchant couplings.
Without further ado, here we go:
The black pipe couplings are made of ungalvanized carbon steel pipes, which are a type of pipe fittings used to extend the pipe. Since it has a dark color surface that is formed by iron oxide during the manufacturing process, it is called a black steel pipe coupling.
To enhance the corrosion resistance, the SANVO factory located in China will sandblast or oil the raw materials. The black steel pipe couplings connect to black iron and black steel pipes are used to transport gas and water.
There are so many different types of couplings available and each one has its specific application. For example, when connecting drop pipes in a well, you may consider using merchant couplings to connect them.
SANVO black merchant couplings are threaded and made of ungalvanized carbon steel pipes, including standard black full merchant couplings, standard black half merchant couplings, extra heavy black full merchant couplings, extra heavy black half merchant couplings, etc.
Merchant couplings are manufactured per ASTM A865 and are intended for use on steel pipe joints by ANSI B1.20.1. Sizes 1⁄8" NPS through 2" NPS are straight-tapped. Sizes 2 1⁄2" NPS and larger are always taper-tapped.
First, it comes down to cost. Tapered threads cost more to manufacture while straight threads cost less to produce.
Second, tapered threads seal better. They seal better because the threads get tighter the further down the coupling, while straight threads stay the same width throughout.
All merchant couplings are chamfered before they are threaded. This means that before the threading is done, a chamfer is created. It can be tricky to tell where the threads start on the chamfer, but it helps start threading the pipe into the coupling.
4. Where To Buy/Purchase Black Steel Merchant Couplings?SANVO is a good stainless and carbon steel coupling manufacturer, supplier, wholesaler, exporter, factory, and company in China, and supplies standard and extra heavy black steel full merchant couplings, half merchant coupling, and API line pipe couplings, etc.
Our black steel merchant couplings can be customized according to drawings, samples, or special requirements of customers, and send samples for free. So, you can choose Hebei Sanvo Pipes And Fittings Co., Ltd. to buy/purchase black steel merchant couplings.
They mainly transport gas and water. It is in plumbing, heating, and cooling systems. Their robustness and durability can be in high-pressure systems.
6. What Is the Difference Between Full and Merchant Couplings?
Full merchant couplings connect two pieces of pipe tightly and stably. However, half-merchant couplings are shorter and suitable for connecting two short pipes, based on the specific installation requirements and space constraints to choice.
First, examine that the surfaces of the pipes are clean.
If using thread sealant, apply it to the male threads of the pipe.
Align the coupling with the ends of the pipes.
Tighten the coupling, being careful not to overtighten it to avoid damage to the threads or the coupling.
Check to ensure no leaks of gas or water after installation.
Such as ASTM A865 and ANSI B1.20.1 can guarantee that the couplings have their intended use in piping systems.
Ungalvanized carbon steel material makes it easy to rust and corrode. But, we enhance corrosion resistance through sandblasting or oiling the raw materials.
We can offer tailored based on specific dimensions, designs, or functional requirements by customer drawings or samples that can meet different project needs.
Sizes range from 1/8" NPS to 2" NPS for straight-tapped couplings; sizes 2 1/2" NPS and large are typically taper-tapped. Please select the applicable size according to the practical.
Our products are high-quality, lower prices, and are complete. Our stainless and carbon steel couplings are durable for various industrial and commercial applications. We also provide perfect customer service, including free samples, to help customers make proper decisions.
If you have any questions, feel free to ask!
